Corrosion Resistant Built-in Variable Damping Mechanism
50 kPa to 2 MPa| Model | Rated Capacity |
|---|---|
| PDU-A-50KP | 50kPa |
| PDU-A-100KP | 100kPa |
| PDU-A-200KP | 200kPa |
| PDU-A-500KP | 500kPa |
| PDU-A-1MP | 1MPa |
| PDU-A-2MP | 2MPa |
| Performance | |
|---|---|
| Rated Capacity | See table above. |
| Nonlinearity | Within??0.2% RO (PDU-A-50 to 500KP) |
| Within??0.25% RO (PDU-A-1 & 2MP) | |
| Hysteresis | Within??0.2% RO (PDU-A-50 to 500KP) |
| Within??0.01%/??C (PDU-A-200KP to 2MP) | |
| Environmental Characteristics | |
| Safe Temperature Range | -30 to 90??C |
| Compensated Temperature Range | -20 to 80??C |
| Temperature Effect on Zero Balance | Within??0.02% RO/??C (PDU-A-50 & 100KP) |
| Within??0.01% RO/??C (PDU-A-200KP to 2MP) | |
| Temperature Effect on Output | Within??0.02%/??C (PDU-A-50 & 100KP) |
| Within??0.01%/??C (PDU-A-200KP to 2MP) | |
| Electrical Characteristics | |
| Safe Excitation Voltage | 15V AC or DC |
| Recommended Excitation Voltage | 1 to 10V AC or DC |
| Input Resistance | 350???1% |
| Output Resistance | 350???1% |
| Cable | 4-conductor (0.3 mm 2 ) chloroprene shielded cable, 7.6 mm diameter by 5 m long, terminated with connector plug |
| (Shield wire is not connected to mainframe.) | |
| Mechanical Properties | |
| Safe Overload Rating | 150% (if an overload of 30 MPa is applied to either high or low pressure side, the transducer is not damaged.) |
| Frequency Response Range | DC to 30 Hz |
| Maximum Line Pressure | 30 MPa |
| Weight | Approx. 6 kg (not including cable) |
TOP