DTP-E-S
Suitable for large displacement by dripproof structure
The DTP-E-S series are potentiometer-based transducers for measurement of large displacement. A drip-proof structure enables applications where they may be splashed with water or involving highly humid environment.
?? Displacement measurement by expansion and contraction (winding) of wire
?? Compact size and low measuring force.
?? Connectable to strain amplifier for measurement
?? Resolution Approx. 1/1850
| Performance |
| Model |
Rated Capacity |
Measuring force(Approx) |
| DTP-E-500S |
500mm |
9.8N |
| DTP-E-1KS |
1000mm |
4.9N |
| DTP-E-2KS |
2000mm |
4.9N |
| Nonlinearity |
Within ??1% RO |
| Hysteresis |
Within ??1% RO |
| Rated Output |
Approx.: 5mV/V(10000??m/V) |
| Resolution |
1/1850 |
| Environmental Characteristics |
| Operating Temperature Range |
-10 to 60??C |
| Electrical Characteristics |
| Detection Method |
Potentiometer based |
| Safe Excitation Voltage |
10V AC or DC |
| Recommended Excitation Voltage |
1 to 5 V AC or DC |
| Input Resistance |
350?? ??5% |
| Dutput Resistance |
350?? ??5% |
| Cable |
4-conductor(0.5mm
2
shielded chloroprehe-coated cable |
| of 10mm diameter by 3m long |
| bare at the tip (Shield is not connected to the chassis) |
| Mechanical Properties |
| Safe Overload Rating |
120% |
| Measuring Force |
See table above |
| Cycling life |
104 times |
| Protection Rating |
IP67 drip proof in conformity to JIS(C0920) |
| Enclolsure |
Stainless |
TOP